Energy Management

ALS20 Accessory

Description:
The ALS20 is an automatic load shed device that helps electrical systems safely operate more items from a limited number of circuit breakers. It allows operation of two 20-Amp loads from a single branch circuit. In a typical RV installation, ALS20 has a sheddable load, such as an electric water heater, connected to the shed circuit and a priority load circuit that is generally used to power appliances. The device on the shed circuit can be delayed temporarily via the ALS20 to allow an "on demand" appliance to be operated when needed. More than 1 ALS20 can be installed for additional branch circuits. The ALS20 is designed to meet the requirements of NEC section 551.42(C).

Specifications:
Amps: 20 Amp | | Listed: ETL Listed | Rated: NEC section 551.42 © | Special Feature: Allows operation of two 20-Amp loads from a single branch circuit | Type: Automatic Load Shed

BR 100 Series Accessory

Description:
BR100 is a solenoid type of high current relay that is typically used to isolate either house or engine batteries from the electrical system they are connected to. This is done to prevent complete battery discharge in long storage periods. It can also be used to isolate batteries in banks to aid in charging or keeping reserve power. The electrical ratings are 12V DC, 100 Amperes continuous, 300 Amperes for surges up to 30 seconds. Mounting brackets must be connected to 12V negative. The BR100 has two 10-Ampere DC fused "accessory" circuits; one on the battery side and one on the 12V system side.

FB12 Fuse Panel

Description:
The FB12 is a fuse panel with 12 DC load circuits. This model has 3 large non-fused terminals rated for 2-14AWG wires. These terminals are common to one another and are the supply side for the branch circuits. Branch circuits rated for 20ADC maximum and branch circuit terminals are rated for 12-16AWG. A feature of the FB12 are the three DC positive inputs for converter and batteries. It is built with a galvanized metal chassis and hinged cover. Included is a terminal bar for 12-volt negative connections and standard automotive blade type fuses. The FB9 can be used with any "Deckmount" style converter or system without a built-in DC load distribution panel.

Specifications:
Listed: ETL Listed | Special Features: Twelve DC load circuits; can be used with any "Deckmount" style converter or system without a built-in DC load distribution panel | Rated: 4 large non-fused terminals rated for 2-14AWG wires & branch circuits are rated for 12-16AWG wires | Series: FB Series | Type: Fuse Panel

FB15 Fuse Panel

Description:
The FB15 is a fuse panel with 15 DC load circuits. This model has 3 large non-fused terminals rated for 2-14AWG wires. These terminals are common to one another and are the supply side for the branch circuits. Branch circuits rated for 20ADC maximum and branch circuit terminals are rated for 12-16AWG. A feature of the F15 are the three DC positive inputs for converter and batteries. It is built with a galvanized metal chassis and hinged cover. Included is a terminal bar for 12-volt negative connections and standard automotive blade type fuses. The FB15 can be used with any "Deckmount" style converter or system without a built-in DC load distribution panel.

Specifications:
Dimensions: 7"L x 5 1/4"W x 1 3/4"H | Listed: ETL Listed | Special Features: Fifteen DC load circuits; can be used with any "Deckmount" style converter or system without a built-in DC load distribution pan | Rated: 5 large non-fused terminals rated for 2-14AWG wires & branch circuits are rated for 12-16AWG wires | Series: FB Series | Type: Fuse Panel | Weight: Varies

We proudly serve RV dealerships throughout North America.